|
Guitar effects pedal
board power supplies
Alctron - Logsdon Audio |
Meridian - Yankee
13/10/2011
See also
effectsdatabase
| stinkfoot
| stinkfoot
recommendation and what not to buy
| Pedal Boards |
Pedal board accessories
|
|
| Brand/model |
DC outlets |
AC outlets |
other features/ reviews |
|
Alctron DCT 100
 |
8 by 9 V
1 by 12 V |
Yes 12V |
Small compact power supply
solution
Switchable voltage 110V – 230/240V
8 x 9V DC Ports sharing the same ground. Giving a total of 500 ma
1 x 12V DC output with isolated ground, giving 500 mA
1 x 12V AC output with isolated ground, giving 500 mA
LED display light activation |
Amdek PSK-5
 |
5 by 9 v outlets. |
Nil |
|
| Arion PS-05 |
|
|
|
Artec Powerbrick SPB-8
 |
6 channels of fixed 9V output and 2
channels of adjustable output ranging from 6V to 12V |
Nil |
Dimensions: 40 x 117 x 72mm.
Reviews |
BBE Supa Charger
 |
8 outputs
Switchable 16V on outputs 5 & 6
9V or 12V switchable on the other outputs |
Nil |
Manual |
|
Biyangs Pedal Power
 |
Slot 1-2 can power effects up to 1000mA or
power up to 5 effect pedals simultaneously.
Slot 3-5 allows powering
up to 100mA, suitable for most effect pedals in the market.
Slots 6-7 is designed based on the Boss ACA, suitable for Boss ACA
effect pedals.
Slots 8-9 provides current of 6V of power for tube driven
effects or any other 6V rated effect. |
Nil |
. Solid Stainless Steel enclosure.
. Size
W 6" x D 4 1/4" x H 6" Weight 2lbs 8 oz.
Reviews |
BOSS
PSM5
 |
9V |
Nil |
Power supply & master switch
Harmony Central reviews
Note the BOSS TU2 Tuner pedal has a power
outlet as well as does the BOSS LS2 Line Selector. |
|
Burkey Flatliner
 |
9V DC - 5 Outputs, 200 mA, short-circuit
protected with a current-limitation on 200 mA
12V DC - 1 Output, 200 mA, short-circuit protected with a
current-limitation on 200 mA
3-9V DC - 1 Output variable ca. 3-9 Volt ; V = voltage, R =
resistance ( 0…20 Ohm)
3-12V DC - 1 Output variable ca. 3-12 Volt ; V = voltage, R =
resistance ( 0…20 Ohm) |
9/12V AC - 1 Output 9 or 12VAC*, capacity
1000 mA This output is protected with a 1AT fuse (on the rear panel)
|
Polarity -All outputs are center negative
Fuses: 1AT:1A-fuse (9VAC output) 160mAT:2-160mA fuses (230 VAC fuses)
Mains ;230VAC 50/60Hz for European power. Configurable for 120VAC/60hz
for US power
Capacity: 33 Watts max
Reviews |
|
Burkey Flatliner Six
 |
6 isolated and regulated outlets, all
adjustable in steps to 9, 12, 15 or 18VDC each @ 100 mA |
nil |
230 VAC 50/60 Hz fused 100mAT
115 VAC 50/60 Hz fused 200mAT
CE 2007
Dimensions (whd) 99x52x85 mm
6 cables (straight and angled connectors) included.
Reviews |
|
Cioks Big John
also known as the Carl
Martin Big John
 |
7 x 9V DC
- Maximum output current: 600mA |
nil |
Short circuit protection
- 2 LED status (red = connected to mains, green = power supply in normal
working condition, when off, the power supply is either overloaded or
short circuited )
- 2m mains cable
- Dimensions: 130x75x40mm
- Weight: 520 g
Reviews |
|
Diago Power
Station |
9V DC @ 3,000 mA (25W) |
Nil |
Note a massive 3 Amp is
available from this supply.
Reviews |
| DIY Power supplies |
|
|
Perth
Bands forum |
| DOD vintage
 |
|
Nil |
This is a pre-wallwart DOD Regulated Power
Supply. (It came with a DOD 250 Overdrive Preamp pedal that I stupidly
sold off years ago, and it's been sitting on my shelf since.) It has
surprisingly few markings on it (such as a product or serial number),
but is labeled 10 volts, 50 MA and NEG. GND. It delivers power through
one of four mini-plugs like they used to used before the industry
standardized on those barrel plugs they use now. |
DOD
FX-105
|
|
|
VINTAGE DOD POWER SUPPLY FX-105 FOR 5
GUITAR PEDALS
|
|
Dunlop DC Brick
 |
7 - 9V Outputs
3 - 18V Outputs |
Nil |
The Dunlop DC-Brick Multi-Power Supply
provides 7 - 9V and 3 - 18V outputs (10 total) for any type of
battery-operated effect pedal. Its fully regulated 1,000-millamp power
keeps your stomps steady without overheating, and with special circuit
protection against shorts and overloads.
Note
this unit used to be called the Juice Box.
Reviews |
|
EFX Box
 |
|
|
12v dc out with buffered
inputs and outputs |
|
Frontline
 |
5 by 9V |
|
|
|
Fryette (formerly VHT) Valvulator
 |
1 by 12 V,
3 by 9.5 V |
nil |
Fryette Valvulator I V1 Line Driver Buffer
and Power Supply Features:
A Vacuum Tube Buffer/Line Driver and a
Multiple Output Regulated DC Power Supply in one unit
Eliminates degradation of tonal quality
Changes guitar signal from high impedance to low impedance
Operates on standard AC wall current (no wall wart needed)
Rugged steel chassis with a sleek stainless steel vented cover
Left Panel
Input Jack
Output A Jack
Output B Jack
Ground Lift Switch
Right Panel
12VDC Output
3 x 9.5VDC Output Jack
AC Input Jack
Reviews |
|
Fuchs
Plush P3 Power Station
 |
|
|
The Plush P3 Power Supply™ is a
self-contained DC power supply, which provides 9-VDC of regulated and
filtered DC power to up to 1500 ma (1.5 amps) of pedals. The patented P3
Power technology:
http://www.p3dals.com/ is designed to power a pedal board without
batteries or extra cables, and operates the pedals via a single
audio/power cable. P3 completely does away with the need for batteries,
battery cables, "wall-warts," extension cords or power strips. P3
is available as an upgrade for most pedals, and there's also an external
power kit available for use with unmodified pedals. P3 is fully
backwards compatible: It will work with and even remotely power non-P3
pedals. P3 does not alter audio circuitry or harm the tone in any way
and may in fact improve sound quality and performance as it eliminates
battery voltage droop along with the batteries. Several pedal makers and
service centers are authorized to perform P3 upgrades to existing
pedals, and P3 is being included in some guitar amplifiers. As
universally useful and beneficial as P3 is, we expect it will become a
standard, becoming to guitar pedals what phantom power is to mixers and
microphones. The P3 power supply has a standard IEC style power
connector, and automatically switches from 100/120 to 220/240 volt AC
lines. The P3 Power Supply features two outputs: the P-32 phantom
output, as well as a traditional (Boss style) connector, which allows P3
and non-P3 equipped pedals to coexist on a pedal board. Patch cables or
the P3 Power Splitter can be used to feed multiple P3 and non-P3 pedals
from the power supply outputs. The power supply is self-protected
against over current and output shorts, automatically turning off under
fault conditions. The P3 Power Supply is made in the USA. |
|
Gator G Bus 8
 |
1500mA power supply has eight 9V outlets
and three 18V outlets |
nil |
|
|
Gig Rig Generator
 |
|
|
5 Amps (that's 5000 milliamps!) of power .
* Incredibly clean regulated studio quality power supply.
* Short circuit protection protects your precious pedals
* Self-healing fuse. It heals itself!
* Will work anywhere in the world between 110-250V. No more step up or
step down transformers.
* Small, light and discrete. Will fit on any pedal board
* 2 boss style daisy chains included FREE |
Godlyke Powerall PA 9B
 |
9 volts DC at 2000 milliamps |
Nil |
Reviews |
Guitar Laboratory G Lab
 |
8 separate 9V |
Nil |
PB-1 is a power supply for
guitar effects with 9V direct current (DC). It has eight full
galvanically separated outputs which enable to built professional guitar
systems without ground loops. Using proper adapters PB-1 enables also to
obtain voltages 12V, 15V and 18V DC. It is worldwide voltage compatible
(nominal line voltage from 100V to 230V) by connecting the mains cable
(attached to the packet) with a connector appropriate for a given
country.
Reviews |
|
Harley-Benton Powerplant
 |
8 x 9V (500 mA all up)
1x12 V (250 mA) |
1x12 V AC 250 mA outlet also. |
Comes with a
variety of cables. |
Logsdon
Audio Fade Box
 |
8,7,6,5 V |
Nil |
The Fade Box allows you to simulate worn
batteries or Fading batteries,
which is useful in transistor-based fuzz and distortion circuits.
The Fade Box has four-output connectors that provide 8,7,6 and 5 volts
DC.
These are fixed voltage
You can use more then one output to run different pedals at the same
time
- no pots to adjust - so once you find the one you like you can stick
with it for great constant tone.
Works on any 9 volt DC power supply like VooDoo labs, The Brick, The
Regulator or the One Spot. |
Logsdon
Audio The Regulator Spirit
 |
6 outlets 9V DC common ground.
Two isolated outputs |
|
Check these out - some very
interesting designs.. |
| Alctron
- Logsdon Audio | Meridian -
Yankee
|
